Last updated: November 13, 2026
A 5.56 can has three jobs on an AR: cut the noise, stay light, and keep gas out of your face. The cheapest good one is the One Horse Ashe at $419, mount included. For a do-everything carbine we’d start with the Dead Air CT5P at $849. For the quietest muzzle numbers among cans we list, look at the Faxon Sentry, Dillon DRC556 and Off Grid Operator Ti, all about 134 to 135 dBA in Thunder Beast Arms’ testing.

Every maker says its can has low back pressure, and half of them say “quietest.” So we did what we did for .22 cans and .30 cal cans. We took eleven 5.56 suppressors listed on our site, pulled the specs from each maker’s own page, and lined them up against sound data from a test the maker didn’t run. Prices are what our product pages showed on November 13, 2026. Availability changes daily, so check the listing before you set your heart on one.
This replaces the AR-15 suppressor guide we ran earlier in the year. A couple of cans from that version, the Dead Air Sierra 5 and the HUXWRX Flow 556K, weren’t available to order from us when we rebuilt it in November, so they dropped out of the main picks. They still show up in the test data where it matters.
Best budget 5.56 suppressors in 2026
The federal tax on a suppressor is $0 this year, so for most folks the price of the can is the price. That makes the tiers matter more than they used to.
Under $450. The One Horse Ashe 5.56 is $419 in OD Green, $434.99 in FDE and $409.99 in black. One Horse lists it at 6 inches, 1.5 inches wide and 5.4 ounces of Grade 5 titanium, with a 1.375×24 HUB rear and a 1/2×28 Plan B mount in the box. It’s built in Brownstown, Indiana. The catch is right on One Horse’s page: it’s tested on 5.56 only, it’s not rated for full auto, and it’s not rated for magnum or high-pressure calibers (One Horse). For a semi-auto AR that’s not much of a catch.
About $700 to $850. This is where most of the shopping really happens. For the extra money you get full-auto ratings and tougher alloys:
- PWS BDE556K-Ti, $699.95. 5.5 inches and 11.5 ounces with its PUB mount installed, 3D-printed Grade 5 titanium monocore, 1.375×24 HUB pattern (PWS).
- Otter Creek Labs Infinity 556K, $775. 5.5 inches and 14.5 ounces of Haynes 282, HUB rear, rated for 5.56 and 6mm, with swappable end caps that change back pressure. It ships with the medium cap; low and high are sold separately (Silencer Shop listing).
- Griffin Armament HUB HRT-556 AM, $788.45. 5.55 inches, 1.5 inches wide and 14.0 ounces, Nickel 625X core on a 17-4 stainless rear, full-auto rated, no barrel length restriction. Griffin calls it ultra low back pressure. It doesn’t ship with a mount, so budget for one (Griffin).
- Dead Air CT5P Patrol, 1/2×28 direct thread, $849. 5.49 inches, 1.6 inches wide and 13.7 ounces in direct-thread form, Haynes 282, full-auto rated for 5.56 and 6mm ARC, no barrel length restrictions (Dead Air). We also carry it in 5/8×24.
About $900 to $1,050. Three of these four posted the best independent muzzle numbers in this whole group, which we get to below.
- SIG Hexium 556 Inconel, $899.99
- Dillon DRC556 titanium, $995
- Faxon Harmonix Sentry, $1,012
- Off Grid Operator Ti, $1,049.99
Over $1,150. The SureFire SOCOM556-RC2 is $1,196 and the HUXWRX Flow 556 Ti is $1,299. With the SureFire you’re paying for a long service record. With the HUXWRX you’re paying for flow-through gas handling.
5.56 suppressor comparison: the specs
Here’s how each maker lists them. Weights and lengths are the maker’s numbers, and some include a mount while others don’t, so the notes column says which. The OCL figures come from a dealer listing because Otter Creek Labs’ own product page wasn’t reachable when we checked.
| Can | Our price (Nov 13, 2026) | Length | Diameter | Weight | Material | Mount | Full-auto | Notes | Source |
|---|---|---|---|---|---|---|---|---|---|
| One Horse Ashe 5.56 | $409.99 to $434.99 | 6 in. | 1.5 in. | 5.4 oz | Grade 5 titanium | 1.375×24 HUB; 1/2×28 Plan B mount included | No | Tested on 5.56 only | One Horse |
| PWS BDE556K-Ti | $699.95 | 5.5 in. with mount | Not listed by PWS | 11.5 oz with mount | 3D-printed Grade 5 titanium | 1.375×24; PUB mount included | Not stated by PWS | Rated up to 5.56 NATO | PWS |
| OCL Infinity 556K | $775 | 5.5 in. | Not listed | 14.5 oz without mount | Haynes 282 | 1.375×24 HUB; no mount included | Not stated in listing | Swappable back pressure end caps; medium installed | Silencer Shop |
| Griffin HUB HRT-556 AM | $788.45 | 5.55 in. | 1.5 in. | 14.0 oz | Nickel 625X, 17-4 H900 stainless | 1.375×24 HUB; no mount included | Yes | No barrel length restriction | Griffin |
| Dead Air CT5P (direct thread) | $849 | 5.49 in. | 1.6 in. | 13.7 oz | Haynes 282 | Direct thread; Xeno and KeyMo versions longer | Yes, 5.56 and 6mm ARC | No barrel length restrictions | Dead Air |
| SIG Hexium 556 Inconel | $899.99 | 5.9 in. | 1.75 in. | 19 oz | 3D-printed Inconel | HUB compatible; 1/2×28 direct-thread steel mount | Not stated by SIG | The titanium Hexium 556 is 6.2 in. and 11 oz | SIG Sauer |
| Dillon DRC556 titanium | $995 | 5.625 in. | 1.75 in. | 10.1 oz; 12.3 oz with adapter | 3D-printed TC4 titanium | 1.375×24 HUB; direct-thread adapter | Not stated in listing | PIP porous-wall gas management | Silencer Shop |
| Faxon Harmonix Sentry 5.56 | $1,012 | 6.75 in. | Not listed | 15.7 oz | Haynes 282 | HUB compatible | Yes | Faxon MSRP $1,099 | Faxon |
| Off Grid Operator Ti | $1,049.99 | 6.5 in. | 1.5 in. | 8.5 oz | 3D-printed titanium | 1/2×28 direct thread | Not stated in specs | Lightest can here | Off Grid |
| SureFire SOCOM556-RC2 | $1,196 | 6.4 in. (3.8 in. added) | 1.5 in. | 17.0 oz | Inconel alloy and stainless | SureFire Fast-Attach | Yes | For 10-inch and longer M4/M16-type barrels | SureFire |
| HUXWRX Flow 556 Ti | $1,299 | 6.8 in. (6.1 in. added) | 1.8 in. | 11.4 oz | 3D-printed titanium | HUXWRX 556 QD muzzle devices | Not stated in white paper | No barrel length restriction; flow-through | HUXWRX white paper |
Look at the weights first. The two lightest cans, the Off Grid at 8.5 ounces and the Ashe at 5.4, are both titanium and both meant for semi-auto use. The Haynes 282 and Inconel cans weigh more, but they carry full-auto ratings. Seven of the eleven use a 1.375×24 HUB rear or ship HUB compatible, so you pick the mount instead of living with the maker’s. If HUB vs direct thread vs QD is new to you, our suppressor mounts explainer sorts it out.
Quietest 5.56 suppressor in 2026: what Thunder Beast measured
The quietest .223-caliber can at the muzzle in Thunder Beast Arms’ 2026 test was the Griffin Armament PRC 22, at 133.2 dBA. Right behind it were the Warsaw Creek Armory Typhon 56 and the Wraith Metal Works Raider Socom 7.5, both at 133.9, and the Next Level Armament Oscar 556 at 134.1. We don’t list all of those, but they tell you where the floor is.
Move the microphone back to the shooter’s ear and the order flips around. Dead Air’s CT5PDT measured 141.5 dBA at the muzzle, near the loud end of the list, but it had the lowest shooter’s-ear reading of any .223 can in the table at 138.84. SIG’s Hexium 5.56 Inconel was next at 139.47. The muzzle number is what the folks next to you hear. The shooter’s-ear number is what you hear behind the rifle. Pick the one that matches how you shoot.
How TBAC ran the test, and why we trust it over maker claims, is in the next section. The full 2026 tables, with weights and lengths, are in Thunder Beast Arms’ 2026 Silencer Summit results.
| Suppressor | Muzzle (Mil dBA avg) | Shooter’s ear (dBA) |
|---|---|---|
| Griffin Armament PRC 22 | 133.2 | 141.16 |
| Warsaw Creek Armory Typhon 56 | 133.9 | 142.16 |
| Wraith Metal Works Raider Socom 7.5 | 133.9 | 139.91 |
| Next Level Armament Oscar 556 | 134.1 | 141.51 |
| SIG Sauer Hexium 5.56 Inconel | 136.7 | 139.47 |
| Dead Air CT5PDT | 141.5 | 138.84 |
How the cans on our site measured
Maker decibel claims don’t line up with each other. Griffin lists 131.0 dB on a 12.5-inch MK2 host. One Horse lists 147.9 dB on a 10.3-inch carbine and 146.4 dB on a 14.5-inch. Those come from different guns, ammo and microphone spots, so they can’t be ranked against each other or against anything below.
The comparison we trust is Thunder Beast Arms’ Silencer Summit. TBAC runs every can on the same Daniel Defense 16-inch AR-15 with Lake City M193 55-grain ammo, the same B&K microphones and the same mic positions, and publishes every result in one table. It ran the event in August of 2024, 2025 and 2026 in Cheyenne, Wyoming, with no setup changes between years (TBAC 2026). TBAC sells suppressors too, but its own cans sit in the same tables as everyone else’s.
The first number below is TBAC’s mil-spec average at the muzzle. The second is at the shooter’s ear, which is what you actually hear behind the rifle. Lower is quieter for both.
| Can (as TBAC listed it) | Muzzle, mil-spec avg | Shooter’s ear | Weight as tested | Event |
|---|---|---|---|---|
| Faxon Sentry 5.56 | 134.4 dBA | 141.26 dBA | 16.9 oz | 2025 |
| Dillon Rifle Co DRC556 | 134.6 dBA | 141.16 dBA | 18.8 oz | 2025 |
| Off Grid Operator Ti | 135.4 dBA | 140.52 dBA | 8.5 oz | 2025 |
| Otter Creek Labs Infinity 556K, solid end cap | 136.2 dBA | 141.16 dBA | 19.1 oz | 2025 |
| SIG Hexium 5.56 Inconel | 136.7 dBA | 139.47 dBA | 19.7 oz | 2026 |
| SureFire Socom 5.56-RC2 | 137.8 dBA | 140.81 dBA | 19.2 oz | 2024 |
| SureFire RC2 556 | 138.7 dBA | 141.73 dBA | 19.2 oz | 2026 |
| HUXWRX Flow 556 Ti | 140.1 dBA | 140.77 dBA | 13.7 oz | 2024 |
| Dead Air CT5PDT | 141.5 dBA | 138.84 dBA | 14.3 oz | 2026 |
| Bare muzzle, same 16 in. AR | 167.0 dBA | 156.29 dBA | None | 2024 |
So which is quietest? At the muzzle, among cans we list, the Faxon Sentry, Dillon DRC556 and Off Grid Operator Ti all landed within one decibel of each other, 134.4 to 135.4 dBA. Call that a tie. At the shooter’s ear it changes. The Dead Air CT5P posted the lowest number in this group at 138.84 dBA even though it was one of the louder cans at the muzzle, and the SIG Hexium Inconel was close behind at 139.47. You see that split a lot with low back pressure designs, which push more gas forward and less back at your face.
Some honest caveats. TBAC’s sheet lists the DRC556 at 18.8 ounces as tested, which is heavier than Dillon’s 10.1-ounce titanium spec, so it may not have been the titanium version. The OCL was tested with a solid end cap, not the medium cap it ships with. The HUXWRX and SureFire cans weighed more on TBAC’s sheet than on the makers’ spec pages, so they were likely tested with a mount attached. And only the One Horse Ashe, PWS BDE556K-Ti and the Griffin HUB HRT-556 AM have no matching TBAC row we could tie to the exact model, so we don’t have an independent number for those three. We didn’t average anything or mix in maker claims.
For context, the very quietest 5.56 cans in TBAC’s 2026 table metered around 133 to 134 dBA, and the very short “K” cans and muzzle-device-style units ran up past 145. Everything on our list sits in the useful middle.
Back pressure and gas blowback
A suppressor slows gas leaving the muzzle, and on a direct-impingement AR some of that gas comes back through the action and into your face. Short barrels and left-handed shooters notice it most. This is why so many 2026 cans are sold as low back pressure or flow-through.
Here’s what each maker says about its own can. HUXWRX built the Flow 556 Ti around its Flow-Through design, which sends gas forward through the can. Griffin calls the HRT-556 AM “extreme low backpressure” and notes it helps left-handed shooters. SIG says the Hexium’s internal design is low back pressure. Dillon uses porous printed walls it calls PIP to bleed off pressure. OCL lets you swap end caps to tune it. PWS lists the BDE556K-Ti as medium back pressure. Those are maker descriptions, not measurements, and none of the free test data we found measures blowback directly. The shooter’s-ear numbers above are the closest proxy.
If your rifle overgasses with a can on, an adjustable gas block or a heavier buffer often fixes it, and that’s a cheaper fix than a second suppressor.
Flow-through vs traditional baffles
A traditional baffle can traps gas in a series of chambers. A flow-through design gives the gas a forward path out of the can. The trade-off shows up in the TBAC table: the flow-style and low back pressure cans tend to be a bit louder at the muzzle and a bit easier on the shooter. The CT5P, Flow 556 Ti and Hexium all fit that pattern. If you mostly shoot from a bench with a long barrel, muzzle number matters more. If you shoot a carbine or an SBR shoulder to shoulder with friends, the shooter’s-ear number is the one to watch.
Direct thread, quick detach and HUB
Direct thread is the simplest and usually the lightest, and it’s what the Off Grid Operator Ti and the direct-thread CT5P use. Quick detach mounts, like SureFire’s Fast-Attach and HUXWRX’s 556 QD devices, let you move one can between rifles that each wear the matching muzzle device. HUB is a standard 1.375×24 rear thread that lets you choose the mount. The Ashe, BDE556K-Ti, Infinity 556K, HRT-556 AM, Hexium, DRC556 and Sentry all use or support it. Most 5.56 barrels are threaded 1/2×28, but check yours before you buy a mount. Our muzzle thread pitch guide shows how to confirm it.
Barrel length, SBRs and full-auto ratings
Short barrels are hard on suppressors. Several cans here say outright that they have no barrel length restriction: the Griffin HRT-556 AM, the Dead Air CT5P and the HUXWRX Flow 556 Ti. SureFire designs the SOCOM556-RC2 for 10-inch and longer M4/M16-type barrels. Check the maker’s page for anything else before you put it on a short barrel.
For a full-auto or hard-use rifle, stick with cans the maker rates for it. On this list that’s the Griffin HRT-556 AM, the Dead Air CT5P, the Faxon Sentry and the SureFire RC2. The One Horse Ashe is specifically not full-auto rated.
Which one we’d put on which AR-15
Tightest budget, semi-auto rifle: the One Horse Ashe. It’s the cheapest can here, the mount is in the box, and at 5.4 ounces you’ll barely notice it.
Best value for a do-everything carbine: the Dead Air CT5P. Full-auto rated, no barrel restriction, and the lowest shooter’s-ear number in our group for $849.
Quietest at the muzzle for the money: the Faxon Sentry or Dillon DRC556. If weight matters more than a decibel, the Off Grid Operator Ti posted nearly the same muzzle number at half the weight.
Hard-use rifle that will see a lot of rounds: the SureFire SOCOM556-RC2 or the Griffin HRT-556 AM.
Least gas in your face: start with the HUXWRX Flow 556 Ti, the SIG Hexium 556 or the CT5P.
Everything here, plus the rest of the lineup, is in our silencers section. Suppressors ship to a licensed dealer for transfer, and we can’t ship them to California, Delaware, Hawaii, Illinois, New Jersey, New York or Rhode Island. Check our state shipping restrictions before you order. If you’ve never bought one, our guide to buying a suppressor walks through how it works today. Barrel not threaded? Our gunsmithing page lists standard rifle barrel threading at $200.
5.56 suppressor FAQ
What is the best 5.56 suppressor for an AR-15 in 2026?
For most AR owners we’d start with the Dead Air CT5P. It’s $849 on our site, full-auto rated, has no barrel length restrictions, and posted the lowest shooter’s-ear reading of the cans we list in Thunder Beast Arms’ 2026 test, 138.84 dBA on a 16-inch AR. If muzzle quietness matters most, the Faxon Sentry and Dillon DRC556 led at 134.4 and 134.6 dBA.
What is the best budget 5.56 suppressor?
The One Horse Ashe 5.56, at $419 in OD Green. It’s 5.4 ounces of Grade 5 titanium with a HUB rear and a 1/2×28 Plan B mount included. It isn’t full-auto rated, and One Horse tests it on 5.56 only. If you want a full-auto rating, the PWS BDE556K-Ti, OCL Infinity 556K, Griffin HRT-556 AM and Dead Air CT5P run $699.95 to $849.
What is the quietest 5.56 suppressor?
Among the cans we list, the Faxon Sentry (134.4 dBA), Dillon DRC556 (134.6) and Off Grid Operator Ti (135.4) were quietest at the muzzle in Thunder Beast Arms’ 2025 Silencer Summit, on a 16-inch AR with M193. At the shooter’s ear, the Dead Air CT5P (138.84 dBA) and SIG Hexium 556 Inconel (139.47) did best in the 2026 event.
Are 5.56 suppressors loud compared to .300 BLK?
Yes, with normal 5.56 ammo. The bullet stays supersonic, so you still hear the crack downrange. In Thunder Beast Arms’ 2026 test, suppressed 5.56 on a 16-inch AR mostly metered in the 130s and low 140s dBA. Subsonic .300 BLK through .30 cal cans had a median around 126 dBA on a different rifle, so it’s a rough comparison.
What suppressor has the least gas blowback?
We couldn’t find free independent blowback measurements to cite. By design, the HUXWRX Flow 556 Ti (flow-through), Griffin HRT-556 AM (extreme low back pressure) and SIG Hexium (low back pressure) are built for it. In Thunder Beast Arms’ data, the Dead Air CT5P and Hexium Inconel had the lowest shooter’s-ear readings of our group, which usually goes with less gas at the face.
Can I use a 5.56 suppressor on other calibers?
Only the calibers the maker rates it for. The OCL Infinity 556K and Dead Air CT5P list 6mm as well as 5.56, and the CT5P’s full-auto rating covers 6mm ARC. The One Horse Ashe is tested on 5.56 only and isn’t rated for magnum or high-pressure calibers. For one can across 5.56 and .30 cal rifles, look at a .30 cal can rated for 5.56.
Do I still need a tax stamp for a 5.56 suppressor?
The federal transfer tax on suppressors is $0 in 2026, and the rest of the buying process changed this year too. Suppressors still ship to a licensed dealer, and state law still applies. We can’t ship them to California, Delaware, Hawaii, Illinois, New Jersey, New York or Rhode Island. Check our state shipping restrictions page before you order. Our suppressor buying guide has the current steps.
Sources and credits
Sources
- Thunder Beast Arms: 2024 Silencer Summit sound results
- Thunder Beast Arms: 2025 Silencer Summit sound results
- Thunder Beast Arms: 2026 Silencer Summit sound results
- One Horse: Ashe 5.56 suppressor and Ashe launch and test data
- Primary Weapons Systems: BDE556K-TI
- Silencer Shop: Otter Creek Labs Infinity 556K
- Griffin Armament: HUB HRT-556 AM
- Dead Air: CT5P
- SIG Sauer: Hexium
- Silencer Shop: Dillon Rifle Co. DRC 5.56 Titanium
- Faxon Firearms: Harmonix Sentry
- Off Grid Suppressors: Operator TI
- SureFire: SOCOM556-RC2
- HUXWRX: FLOW 556 Ti white paper
Change log
- November 10, 2026: Rewritten and republished. Picks limited to cans available to order at the time, prices updated, Thunder Beast Arms 2024 to 2026 test data added, FAQ expanded.
- November 13, 2026: Rewritten for readability in our new house style. Opening, link styling, FAQ and sources moved into dropdowns, prices rechecked against our product pages (black Ashe now $409.99), phone number removed, state list replaced with a link to our restrictions page. No test data changed.
- March 2026: Original version.

