The Atrius G-Lever is the ambidextrous Atrius selector built to work with select Geissele triggers. It’s the only Atrius selector with that expanded compatibility, and it comes with a lever blocker.
How it works
An Atrius selector replaces your safety, not your trigger. In Semi, your rifle runs normally. In Super-Semi, a cam on the selector pushes the trigger forward as the bolt carrier cycles, so the trigger resets faster. You still pull the trigger for every shot: one pull, one round.
Compatibility
| Platform | AR-15 (mil-spec/full profile) |
| Geissele triggers | SSA, SSA-E and G2S |
| Not compatible | Geissele “X” models and Lightning Bow versions |
| Other triggers | Mil-spec triggers with a squared-off trigger bar |
Atrius lists these minimum requirements:
- Mil-spec AR-15 lower with a low shelf and a full-profile (M16) trigger pocket. High shelf lowers don’t work.
- Full-profile bolt carrier group
- H2 or H3 buffer
- A trigger with a squared-off trigger bar at the rear. Mil-spec triggers with a U-notch or relief cut don’t work; competition and cassette triggers may or may not.
Atrius also notes: AR-10/SR-25 rifles need significant gunsmithing, AR9 variants may need gunsmithing, and rifles set up for a Super Safety may not work with the Atrius selector. The selector screw is a T10, 4-40 thread; Atrius recommends 15 in-lb with blue Loctite. Check the Atrius compatibility guide for the tested trigger list.
What’s in the box
- Atrius G-Lever Ambidextrous Forced Reset Selector
- Lever blocker
Install notes
Atrius calls it drop-in: it goes where your safety selector goes, and some fitting may be needed depending on your parts. If it binds, Atrius’s FAQ walks through the checks. Our gunsmithing team can install it for you.
Specifications
| Brand | Atrius Development Group |
| Model | G-Lever Ambidextrous Forced Reset Selector |
| Style | Ambidextrous |
| Positions | Safe, Semi, Super-Semi |
| Compatibility | Geissele SSA, SSA-E and G2S triggers, plus mil-spec and full-profile AR-15 parts |
| Install | Drop-in, no modifications |
| Detent | 90-degree indexing |
| Material | Heat-treated 4140 steel |
| Finish | Black nitride |
| Made in | USA |
| MPN | ADG-FRS-AMBI-G |
| UPC | 850079014022 |
Order online and it ships straight to you. It’s a part, not a firearm, so it doesn’t need to go through an FFL.
Federal status and state laws
Under federal law, a forced reset selector that needs a separate pull for every shot is not an NFA item today. A federal court in Texas ruled that way in July 2024 (National Association for Gun Rights v. Garland), and in May 2025 the Justice Department dropped its appeal and settled its forced reset trigger cases with Rare Breed Triggers.
State law is a different story. California, Colorado, Connecticut, Delaware, Hawaii, Illinois, Maryland, Massachusetts, Minnesota, Nevada, New Jersey, New York, Oregon, Rhode Island and Washington, D.C. ban or restrict forced reset triggers and similar trigger devices (California’s attorney general spelled this out in a 2025 bulletin). Florida’s attorney general said on Nov. 13, 2026 that the state’s bump-fire stock law, which has been read to cover forced reset triggers, is unconstitutional, but the law is still on the books. We cannot ship FRT parts to: California, Colorado, Connecticut, Delaware, Hawaii, Illinois, Maryland, Massachusetts, Minnesota, Nevada, New Jersey, New York, Oregon, Rhode Island, Washington state or Washington, D.C. Orders to these states will be cancelled and refunded.
This is general information, not legal advice. Laws change, and local rules can be stricter than state law, so check where you live before you order.







Reviews
There are no reviews yet.